{"product_id":"c-l-x-type-p-os-type-itc-pltc-armored-single-pair-90-deg-c","title":"C-L-X Type P-OS, Type ITC\/PLTC, Armored, Single Pair  - 90 Deg. C","description":"[short]\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003eBare soft annealed copper, Class B, 7-strand concentric per ASTM B-8. \u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eX-Olene (XLP), UL 13 and UL Standard 2250, 15 mils nominal thickness, 90°C temperature rating.\u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003e Pigmented black and white in pairs, black, red and white in triads. Pair or triad assembled with left-hand lay.\u003cbr\u003e \u003cstrong\u003eCable Shield: \u003c\/strong\u003eAluminum\/Polyester tape over lapped to provide 100% coverage, and a #18 AWG 7-strand tinned copper drain wire.\u003cbr\u003e \u003cstrong\u003eInner Jacket: \u003c\/strong\u003eBlack, flame-retardant Okoseal (PVC) per UL 13 and UL Standard 2250. A ripcord is laid longitudinally under the jacket to facilitate removal. \u003cbr\u003e \u003cstrong\u003eC-L-X Jacket: \u003c\/strong\u003eA close-fitting, impervious, continuously welded and corrugated aluminum sheath provides complete protection against moisture,liquids, and gases, has excellent mechanical strength and provides equipment grounding through the sheath. \u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack, flame-retardant low temperature PVC Okoseal per UL Subject 13 and UL Standard 2250.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassifications\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e UL Listed as Type ITC\/PLTC — Instrumentation Tray Cable\/Power Limited Tray Cable for use in accordance with Article 727 and Article 725 of the National Electrical Code.\u003cbr\u003e These cables comply with UL 2250 and UL 13 for PLTC, CL2 and CL3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e Okonite Type C-L-X P-OS (Pair\/Triad - Overall Shield) instrumentation cables are designed for use as instrumentation, process control, and computer cables in ITC non-classified or labeled circuits up to 150 volts and 5 amps (750VA) and in Class 2 or 3 Power-Limited circuits where shielding against external interference is required, but shielding against interference among groups is not required; indoors or outdoors; in wet or dry locations with conductor operating temperatures up to 90°C; in cable trays; in raceways; supported by a messenger wire; under raised floors; for direct burial. Suitable Class I, Division 2, Class II, Division 2, or Class III, Division 2 and Class I, Zone 2 hazardous locations. Also for use as Power-Limited protective signaling cable (FPL) per NEC Code 760.\u003cbr\u003e The C-L-X sheath provides physical protection against mechanical damage. It may be installed in both exposed and concealed work, secured to supports not greater than 6 feet apart.\u003cbr\u003e The overall shield eliminates most of the static interference from the electric field radiated by power cables and other electrical equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the UL 1581, IEEE 383-1974, \u0026amp; IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU\/hr. vertical tray flame test per ICEA T-29-520\u003c\/li\u003e\n\u003cli\u003eRecommended for dc applications in wet environments.\u003c\/li\u003e\n\u003cli\u003eUL listed as sunlight resistant.\u003c\/li\u003e\n\u003cli\u003eUL listed for direct burial.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X enclosure permits installation in cable tray containing light and power cables without a barrier separator.\u003c\/li\u003e\n\u003cli\u003eIndividual pairs or triads are numbered and color coded for simplified hook-up.\u003c\/li\u003e\n\u003cli\u003eExcellent noise rejection.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eC-L-X sheath exceeds equipment grounding conductor requirements of NEC Article 250-118.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eOSHA acceptable.\u003c\/li\u003e\n\u003cli\u003eUL listed as Marine Shipboard cable.\u003c\/li\u003e\n\u003cli\u003eListed by American Bureau of Shipping (ABS) as CWCMC-PLTC and CWCMC- ITC.\u003c\/li\u003e\n\u003cli\u003eMeets API Standards 14F and 14FZ.\u003c\/li\u003e\n\u003cli\u003eSuitable for low temperature installation to -40°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n[\/short]","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552917913700,"sku":"NNC8356X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/clx-pos-single-105_2_302180b0-4db4-481b-88b8-84595463f6d2.jpg?v=1762461829","url":"https:\/\/nassaunationalcable.com\/en-ca\/products\/c-l-x-type-p-os-type-itc-pltc-armored-single-pair-90-deg-c","provider":"NassauNationalCable","version":"1.0","type":"link"}