{"product_id":"546-31-3403-c-l-x-type-mc-hl-xhhw-2-14-awg-3-conductors","title":"546-31-3403 C-L-X Type MC-HL (XHHW-2) - 14 AWG - 3 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e\n X-Olene® is Okonite's trade name for its chemically  cross-linked  polyethylene,  with  high dielectric strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor Coding\u003c\/strong\u003e\u003cbr\u003e\nConductors 6 AWG and smaller are color coded using base colors and tracers in accordance with the Conductor Identification Table on the back of this  Data  Sheet.  Sizes  4  AWG  and  larger  are printed number\/color coded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly and Coverings\u003c\/strong\u003e\u003cbr\u003e\nThe  individual  conductors  are  cabled  together with  non-hygroscopic  fillers  and  a  binder  tape overall. The C-L-X sheath exceeds the grounding conductor requirements of Table 250.122 of the NEC  and  UL  1569.  A  bare  stranded  copper grounding conductor(s), located in the outer interstices, is provided for grounding. The impervious, continuous, welded, corrugated aluminum C-L-X sheath  provides  complete  protection  against moisture,  liquids  and  gases  and  has  excellent mechanical  strength.    For  direct  burial  in  the ground, embedment in concrete, or for areas subjected  to  corrosive  atmospheres,  the  C-L-X sheath is protected with a low temperature black Okoseal® (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e\n C-L-X Type MC-HL cables with the impervious, continuous, corrugated aluminum sheath are recommended as an economical alternate to a wire in conduit system.\u003cbr\u003e\n They are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with Article 330 and 725 of the NEC.\u003cbr\u003e\nC-L-X Type MC-HL cables may be installed in doors or outdoors, in wet or dry locations, as open runs  of  cable  secured  to  supports  spaced  not more than six feet apart, in cable tray, as aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete.  C-L-X type MC-HL cables are also approved for Classes I, II and III, Division 1 and 2 and Class I, Zones 1 and 2 hazardous locations — NEC Articles 501, 502, 503 and 505.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eConductors:\u003c\/strong\u003e Uncoated soft copper per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger  are  compact  stranded per ASTM B-496.\u003cbr\u003e\n \u003cstrong\u003eInsulation: \u003c\/strong\u003eX-Olene  per  ICEA  S-95-658\/NEMA  WC70  and  UL  44,  Listed  UL  Type XHHW-2.  Meets  MIL-DTL-1377H,  section 4.8.4.1.2 cold bend at -66°C and ASTM D746-04 brittle point at -76°C.\u003cbr\u003e\n \u003cstrong\u003eConductor Identification:\u003c\/strong\u003e Control Sizes, #9 AWG  and  smaller,  color  coded  insulation\u003cbr\u003e\n Power Sizes, #8 AWG and larger, black with printed words of number and color.\u003cbr\u003e\n \u003cstrong\u003eGrounding Conductor(s):\u003c\/strong\u003e One or three bare soft copper per ASTM B-3. Stranded in accordance with UL 1581. Meets or exceeds requirements of NEC Table 250.122.\u003cbr\u003e\n \u003cstrong\u003eSheath:\u003c\/strong\u003e Close  fitting,  impervious,  continuous,  welded,  corrugated  aluminum  C-L-X per UL 1569.  Exceeds grounding conductor requirements of NEC Table 250.122.\u003cbr\u003e\n\u003cstrong\u003eJacket:\u003c\/strong\u003e Black  Okoseal  (PVC)  per  UL1569. Meets ASTM D746-04 brittle point at -40°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eUL Listed as Type MC-HL cable per E38916\u003c\/li\u003e\n \u003cli\u003eUL Listed for cable tray use, direct burial and sunlight resistant.\u003c\/li\u003e\n \u003cli\u003eUL 1309 (CWCMC) listed \u0026amp; UL classified in accord with IEEE 1580 as Marine Ship board Cable rated 600\/1000 volts.\u003c\/li\u003e\n \u003cli\u003eCSA listed as RA90, FT4, HL and LTGG (-40°C).\u003c\/li\u003e\n \u003cli\u003ePasses  the  IEEE  383-1974  and  IEEE 1202 vertical tray flame tests.\u003c\/li\u003e\n \u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n \u003cli\u003eComplete  pre-packaged,  factory-tested wiring system; color coded.\u003c\/li\u003e\n \u003cli\u003eC-L-X  cables  are  quality  control  inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n \u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n \u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n \u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n \u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n \u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n \u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n \u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n \u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n \u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n \u003cli\u003eInstallation temperature of -40°C or °F.\u003c\/li\u003e\n \u003cli\u003eComplies with NEC Articles 501, 502 and 503 for hazardous locations.\u003c\/li\u003e\n \u003cli\u003eAmerican  Bureau  of  Shipping  Type approved as CWCMC Type MC-HL.\u003c\/li\u003e\n \u003cli\u003eThree symmetrical grounding conductors for  PWM\/VFD  and  other  modern  AC drive\/motor applications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27540328251492,"sku":"NNC7105X","price":4.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/clx-mchl-xhhw2_33_ec622564-ad5f-4c9c-b816-a1b4fff08b11.jpg?v=1762460887","url":"https:\/\/nassaunationalcable.com\/en-ca\/products\/546-31-3403-c-l-x-type-mc-hl-xhhw-2-14-awg-3-conductors","provider":"NassauNationalCable","version":"1.0","type":"link"}