{"title":"OKOZEL CONTROL CABLE","description":"","products":[{"product_id":"203-76-3152-okozel-control-cable-18-awg-2-conductors","title":"203-76-3152 Okozel Control Cable - 18 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551605981284,"sku":"NNC8099X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50.jpg?v=1762461657"},{"product_id":"203-76-3153-okozel-control-cable-18-awg-3-conductors","title":"203-76-3153 Okozel Control Cable - 18 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551606112356,"sku":"NNC8100X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_afd681a6-f2c8-44b9-9d3a-f64f53fce1de.jpg?v=1759805448"},{"product_id":"203-76-3154-okozel-control-cable-18-awg-4-conductors","title":"203-76-3154 Okozel Control Cable - 18 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551606145124,"sku":"NNC8101X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_dc86317b-5bbe-4ca4-b27a-3b3a66484d01.jpg?v=1759805449"},{"product_id":"203-76-3155-okozel-control-cable-18-awg-5-conductors","title":"203-76-3155 Okozel Control Cable - 18 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551606177892,"sku":"NNC8102X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_d94afff5-a11d-4041-8ee2-e4e91f7ef7e6.jpg?v=1759805449"},{"product_id":"203-76-3157-okozel-control-cable-18-awg-7-conductors","title":"203-76-3157 Okozel Control Cable - 18 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551606571108,"sku":"NNC8103X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_5ce25772-69c8-4199-af36-eb67d05ea6e8.jpg?v=1762461660"},{"product_id":"203-76-3159-okozel-control-cable-18-awg-9-conductors","title":"203-76-3159 Okozel Control Cable - 18 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551606603876,"sku":"NNC8104X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_e0532409-85a9-4692-9daf-235630d9b5ec.jpg?v=1762461662"},{"product_id":"203-76-3162-okozel-control-cable-18-awg-12-conductors","title":"203-76-3162 Okozel Control Cable - 18 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551606669412,"sku":"NNC8105X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_ecdb8975-6bd6-482b-a35f-8310fe2d4166.jpg?v=1759805450"},{"product_id":"203-76-3169-okozel-control-cable-18-awg-19-conductors","title":"203-76-3169 Okozel Control Cable - 18 AWG - 19 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551606898788,"sku":"NNC8106X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_5ab7bac4-67bd-48e6-a2b8-94f45936d5e8.jpg?v=1762461663"},{"product_id":"203-76-3187-okozel-control-cable-18-awg-37-conductors","title":"203-76-3187 Okozel Control Cable - 18 AWG - 37 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551606931556,"sku":"NNC8107X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_272e889b-66fc-4eae-8d31-9c0f00c9434d.jpg?v=1759805450"},{"product_id":"203-76-3252-okozel-control-cable-16-awg-2-conductors","title":"203-76-3252 Okozel Control Cable - 16 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551607029860,"sku":"NNC8108X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_60edbdc8-f5c2-4225-8544-063c2ca161fe.jpg?v=1762461664"},{"product_id":"203-76-3253-okozel-control-cable-16-awg-3-conductors","title":"203-76-3253 Okozel Control Cable - 16 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551607390308,"sku":"NNC8109X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_5fa3df2b-3ee1-4a99-8961-53094e64721b.jpg?v=1762461664"},{"product_id":"203-76-3254-okozel-control-cable-16-awg-4-conductors","title":"203-76-3254 Okozel Control Cable - 16 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551609159780,"sku":"NNC8110X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_a505f2e7-9305-44cc-98db-f9639fcee91c.jpg?v=1762461666"},{"product_id":"203-76-3255-okozel-control-cable-16-awg-5-conductors","title":"203-76-3255 Okozel Control Cable - 16 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551610241124,"sku":"NNC8111X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_2f4502be-9ce5-478e-9c53-c6fa530ac71d.jpg?v=1762461666"},{"product_id":"203-76-3257-okozel-control-cable-16-awg-7-conductors","title":"203-76-3257 Okozel Control Cable - 16 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551610306660,"sku":"NNC8112X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_a9ce95e5-70cb-4aa8-9c6a-6ae513727fd4.jpg?v=1762461667"},{"product_id":"203-76-3259-okozel-control-cable-16-awg-9-conductors","title":"203-76-3259 Okozel Control Cable - 16 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551610339428,"sku":"NNC8113X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_9b338f23-999c-40d0-8561-36dc3f96e03e.jpg?v=1762461667"},{"product_id":"203-76-3262-okozel-control-cable-16-awg-12-conductors","title":"203-76-3262 Okozel Control Cable - 16 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551610470500,"sku":"NNC8114X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_58577a8c-d0c5-4518-9686-7fd58e129d58.jpg?v=1759805452"},{"product_id":"203-76-3269-okozel-control-cable-16-awg-19-conductors","title":"203-76-3269 Okozel Control Cable - 16 AWG - 19 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551610536036,"sku":"NNC8115X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_a5c4703f-5a3e-4a34-b67c-339f05330932.jpg?v=1762461668"},{"product_id":"203-76-3287-okozel-control-cable-16-awg-37-conductors","title":"203-76-3287 Okozel Control Cable - 16 AWG - 37 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551610667108,"sku":"NNC8116X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_ec988065-e83c-452a-84fd-579404bab974.jpg?v=1762461670"},{"product_id":"203-76-3352-okozel-control-cable-14-awg-2-conductors","title":"203-76-3352 Okozel Control Cable - 14 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551610765412,"sku":"NNC8117X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_9f6052c4-55cc-4b03-8a48-db0a7fd9fde4.jpg?v=1762461670"},{"product_id":"203-76-3353-okozel-control-cable-14-awg-3-conductors","title":"203-76-3353 Okozel Control Cable - 14 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551610798180,"sku":"NNC8118X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_e5cacf85-d87e-45f9-acdb-90c94bcbe31a.jpg?v=1762461671"},{"product_id":"203-76-3354-okozel-control-cable-14-awg-4-conductors","title":"203-76-3354 Okozel Control Cable - 14 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551612010596,"sku":"NNC8119X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_550a1801-7a53-4a07-a4e8-2387c8b2f072.jpg?v=1759805452"},{"product_id":"203-76-3355-okozel-control-cable-14-awg-5-conductors","title":"203-76-3355 Okozel Control Cable - 14 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551612502116,"sku":"NNC8120X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_9f8e41e1-82ff-44ee-ac58-2eddd6ac87fd.jpg?v=1759805454"},{"product_id":"203-76-3357-okozel-control-cable-14-awg-7-conductors","title":"203-76-3357 Okozel Control Cable - 14 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551612567652,"sku":"NNC8121X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_bae1a364-aac0-40c8-aaaa-d3d87cb58b54.jpg?v=1762461673"},{"product_id":"203-76-3359-okozel-control-cable-14-awg-9-conductors","title":"203-76-3359 Okozel Control Cable - 14 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551612698724,"sku":"NNC8122X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_3b1022f0-ca3d-4e83-b631-70d2ca973024.jpg?v=1759805453"},{"product_id":"203-76-3362-okozel-control-cable-14-awg-12-conductors","title":"203-76-3362 Okozel Control Cable - 14 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551612731492,"sku":"NNC8123X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_e1e1cf23-ee22-4e95-bee8-066e902fe124.jpg?v=1762461674"},{"product_id":"203-76-3369-okozel-control-cable-14-awg-19-conductors","title":"203-76-3369 Okozel Control Cable - 14 AWG - 19 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551613026404,"sku":"NNC8124X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_2e2687f9-0f75-49b5-ab2a-46385c9ab4ef.jpg?v=1762461674"},{"product_id":"203-76-3387-okozel-control-cable-14-awg-37-conductors","title":"203-76-3387 Okozel Control Cable - 14 AWG - 37 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551613091940,"sku":"NNC8125X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_479dfe3e-b509-4f50-baae-e0789545dc93.jpg?v=1762461675"},{"product_id":"203-76-3452-okozel-control-cable-12-awg-2-conductors","title":"203-76-3452 Okozel Control Cable - 12 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551613124708,"sku":"NNC8126X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_f62ea0df-c652-46f7-86c5-8137b380941f.jpg?v=1762461675"},{"product_id":"203-76-3453-okozel-control-cable-12-awg-3-conductors","title":"203-76-3453 Okozel Control Cable - 12 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551613419620,"sku":"NNC8127X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_c4534293-73e1-4322-9306-156249d7307d.jpg?v=1762461676"},{"product_id":"203-76-3454-okozel-control-cable-12-awg-4-conductors","title":"203-76-3454 Okozel Control Cable - 12 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551613485156,"sku":"NNC8128X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_bf34b481-edaa-477e-9dda-f380ee21a8b0.jpg?v=1759805455"},{"product_id":"203-76-3455-okozel-control-cable-12-awg-5-conductors","title":"203-76-3455 Okozel Control Cable - 12 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551613517924,"sku":"NNC8129X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_4cc05947-6e9b-41a7-9df2-3e610d55086a.jpg?v=1762461678"},{"product_id":"203-76-3457-okozel-control-cable-12-awg-7-conductors","title":"203-76-3457 Okozel Control Cable - 12 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551613616228,"sku":"NNC8130X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_fff70ed7-4008-4f0a-82b5-d7d02ac26301.jpg?v=1762461678"},{"product_id":"203-76-3459-okozel-control-cable-12-awg-9-conductors","title":"203-76-3459 Okozel Control Cable - 12 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551613681764,"sku":"NNC8131X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_0865c738-0ce0-4852-9163-762a2fa40369.jpg?v=1762461678"},{"product_id":"203-76-3462-okozel-control-cable-12-awg-12-conductors","title":"203-76-3462 Okozel Control Cable - 12 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551613714532,"sku":"NNC8132X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_8810bbcf-ef5f-4218-972a-02cb7b633a53.jpg?v=1759805455"},{"product_id":"203-76-3469-okozel-control-cable-12-awg-19-conductors","title":"203-76-3469 Okozel Control Cable - 12 AWG - 19 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551614074980,"sku":"NNC8133X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_b915a4cb-a8b3-40ba-ab8c-d9fa972529b8.jpg?v=1762461679"},{"product_id":"203-76-3487-okozel-control-cable-12-awg-37-conductors","title":"203-76-3487 Okozel Control Cable - 12 AWG - 37 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551615615076,"sku":"NNC8134X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_1273582e-ffb5-4bee-8407-845e3eeb1720.jpg?v=1762461681"},{"product_id":"203-76-3552-okozel-control-cable-10-awg-2-conductors","title":"203-76-3552 Okozel Control Cable - 10 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551617319012,"sku":"NNC8135X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_9173dc90-8fdc-4f3e-9f0b-097b51f9807a.jpg?v=1762461680"},{"product_id":"203-76-3553-okozel-control-cable-10-awg-3-conductors","title":"203-76-3553 Okozel Control Cable - 10 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551617712228,"sku":"NNC8136X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_27dfdf3c-f883-44f3-9370-e037429979c3.jpg?v=1759805456"},{"product_id":"203-76-3554-okozel-control-cable-10-awg-4-conductors","title":"203-76-3554 Okozel Control Cable - 10 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551617744996,"sku":"NNC8137X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_1ea40425-c454-449d-919d-658ba66518e3.jpg?v=1759805456"},{"product_id":"203-76-3555-okozel-control-cable-10-awg-5-conductors","title":"203-76-3555 Okozel Control Cable - 10 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551617777764,"sku":"NNC8138X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_a049fcfd-618f-4f99-8757-5703eca38835.jpg?v=1762461682"},{"product_id":"203-76-3557-okozel-control-cable-10-awg-7-conductors","title":"203-76-3557 Okozel Control Cable - 10 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618105444,"sku":"NNC8139X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_20d5508b-ef93-4d3f-9f07-41433121e56e.jpg?v=1759805457"},{"product_id":"203-76-3559-okozel-control-cable-10-awg-9-conductors","title":"203-76-3559 Okozel Control Cable - 10 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618138212,"sku":"NNC8140X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_a5e8ebea-3580-4844-a4bf-a28ef3b73741.jpg?v=1759805458"},{"product_id":"203-76-3562-okozel-control-cable-10-awg-12-conductors","title":"203-76-3562 Okozel Control Cable - 10 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618170980,"sku":"NNC8141X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_a7e02fce-6173-4b4b-ab08-f2e67e4f4a97.jpg?v=1759805459"},{"product_id":"203-76-3652-okozel-control-cable-9-awg-2-conductors","title":"203-76-3652 Okozel Control Cable - 9 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618236516,"sku":"NNC8142X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_2edc49a2-c088-4415-877a-1b331246fb81.jpg?v=1762461685"},{"product_id":"203-76-3653-okozel-control-cable-9-awg-3-conductors","title":"203-76-3653 Okozel Control Cable - 9 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618302052,"sku":"NNC8143X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_cfb24c51-f12b-4d6a-b8af-161fb73f7b74.jpg?v=1762461686"},{"product_id":"203-76-3654-okozel-control-cable-9-awg-4-conductors","title":"203-76-3654 Okozel Control Cable - 9 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618367588,"sku":"NNC8144X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_7ceeddf2-45da-45ae-9d59-99ca0f471199.jpg?v=1762461686"},{"product_id":"203-76-3655-okozel-control-cable-9-awg-5-conductors","title":"203-76-3655 Okozel Control Cable - 9 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618859108,"sku":"NNC8145X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_9c638844-4ee8-4f9c-8d02-9418986070d9.jpg?v=1762461687"},{"product_id":"203-76-3657-okozel-control-cable-9-awg-7-conductors","title":"203-76-3657 Okozel Control Cable - 9 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618891876,"sku":"NNC8146X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_72caa31c-2393-4d07-ae61-b49fa47e05bb.jpg?v=1762461687"},{"product_id":"203-76-3659-okozel-control-cable-9-awg-9-conductors","title":"203-76-3659 Okozel Control Cable - 9 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618957412,"sku":"NNC8147X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_8f84108c-c1f9-449e-bd6e-ed8ffb9642a0.jpg?v=1762461688"},{"product_id":"203-76-3662-okozel-control-cable-9-awg-12-conductors","title":"203-76-3662 Okozel Control Cable - 9 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains all useful physical properties at temperatures down to -100°F (-148°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant, radiation-resistant Okozel, a modified ETFE fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635. \u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003eBase colors with traces in accordance with ICEA S-73-532, Method 1. See table on back of sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled together in accordance with ICEA S-73-532; with non-hygroscopic fillers as required; and a binder tape overall.\u003cbr\u003e \u003cstrong\u003e Jacket: \u003c\/strong\u003eFlame-retardant, fuel and chemical-resistant Okozel. Cable meets or exceeds the requirements of IEEE Std. 383, Type Test of Class IE Electric Cables for Nuclear Power Generating Stations and is rated “non-burning” under ASTM D635.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okozel control cables are recommended for use in fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry locations and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLPE or rubber constructions.\u003cbr\u003e Okozel control cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the Vertical Tray Flame Test requirements of UL 1581 at 70,000 Btu\/hr, ICEA T-29-520 210,000 Btu\/Hr., and IEEE 1202-1991.\u003c\/li\u003e\n\u003cli\u003e150°C continuous operating temperature, 90°C in containment area.\u003c\/li\u003e\n\u003cli\u003eLow smoke emission.\u003c\/li\u003e\n\u003cli\u003eLow surface friction provides easier installation.\u003c\/li\u003e\n\u003cli\u003eSmaller and lighter diameter permits more cables per tray.\u003c\/li\u003e\n\u003cli\u003eCold installation temperature in excess of -65°C.\u003c\/li\u003e\n\u003cli\u003eExceptional abrasion resistance, will not cut or tear.\u003c\/li\u003e\n\u003cli\u003eChemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.\u003c\/li\u003e\n\u003cli\u003eHigh dielectric strength.\u003c\/li\u003e\n\u003cli\u003eLow dielectric constant.\u003c\/li\u003e\n\u003cli\u003eSpecial designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551618990180,"sku":"NNC8148X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okozel-control-cable_50_420b16e4-1e5a-4217-9349-159239765c17.jpg?v=1762461689"}],"url":"https:\/\/nassaunationalcable.com\/en-ca\/collections\/okozel-control-cable.oembed?page=4","provider":"NassauNationalCable","version":"1.0","type":"link"}