{"title":"OKOTHERM CIC FIRE RESISTANT TYPE MC C-L-X","description":"","products":[{"product_id":"546-15-3452-okotherm-cic-fire-resistant-cable-14-awg-2-conductors","title":"546-15-3452 Okotherm CIC Fire Resistant Type MC C-L-X - 14 AWG - 2 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551537430628,"sku":"NNC7837X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_a16eb7cc-3972-4d72-8e08-0faf2b434b38.jpg?v=1762461380"},{"product_id":"546-15-3553-okotherm-cic-fire-resistant-cable-12-awg-3-conductors","title":"546-15-3553 Okotherm CIC Fire Resistant Type MC C-L-X - 12 AWG - 3 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551537528932,"sku":"NNC7838X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_43b72eff-b662-4da7-aa3d-217375c4f276.jpg?v=1759805395"},{"product_id":"546-15-3454-okotherm-cic-fire-resistant-cable-14-awg-4-conductors","title":"546-15-3454 Okotherm CIC Fire Resistant Type MC C-L-X - 14 AWG - 4 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551537692772,"sku":"NNC7839X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_55d3aa3f-6f6e-43f8-8f2a-143ccb52acba.jpg?v=1762461382"},{"product_id":"546-15-3455-okotherm-cic-fire-resistant-cable-14-awg-5-conductors","title":"546-15-3455 Okotherm CIC Fire Resistant Type MC C-L-X - 14 AWG - 5 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551537987684,"sku":"NNC7840X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_5b48e71d-ad44-45eb-9d0e-efb6aa8dbee1.jpg?v=1759805395"},{"product_id":"546-15-3457-okotherm-cic-fire-resistant-cable-14-awg-7-conductors","title":"546-15-3457 Okotherm CIC Fire Resistant Type MC C-L-X - 14 AWG - 7 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551538053220,"sku":"NNC7841X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_f8512183-3639-41b7-a1d6-8bb6b293abda.jpg?v=1762461382"},{"product_id":"546-15-3459-okotherm-cic-fire-resistant-cable-14-awg-9-conductors","title":"546-15-3459 Okotherm CIC Fire Resistant Type MC C-L-X - 14 AWG - 9 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551538118756,"sku":"NNC7842X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_8da032f7-47da-485c-9130-205c76b595df.jpg?v=1762461383"},{"product_id":"546-15-3462-okotherm-cic-fire-resistant-cable-14-awg-12-conductors","title":"546-15-3462 Okotherm CIC Fire Resistant Type MC C-L-X - 14 AWG - 12 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551538217060,"sku":"NNC7843X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_777d902f-659c-4feb-b857-988ec929f2a1.jpg?v=1759805396"},{"product_id":"546-15-3469-okotherm-cic-fire-resistant-cable-14-awg-19-conductors","title":"546-15-3469 Okotherm CIC Fire Resistant Type MC C-L-X - 14 AWG - 19 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551538544740,"sku":"NNC7844X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_86da399b-8c58-4496-9b44-eda15c53f357.jpg?v=1759805396"},{"product_id":"546-15-3487-okotherm-cic-fire-resistant-cable-14-awg-37-conductors","title":"546-15-3487 Okotherm CIC Fire Resistant Type MC C-L-X - 14 AWG - 37 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551541657700,"sku":"NNC7845X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_f6920bb4-2dc5-43b8-9fee-0738463270d7.jpg?v=1762461384"},{"product_id":"546-15-3552-okotherm-cic-fire-resistant-cable-12-awg-2-conductors","title":"546-15-3552 Okotherm CIC Fire Resistant Type MC C-L-X - 12 AWG - 2 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551541788772,"sku":"NNC7846X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_11cfcd7d-6c7f-493b-9a11-3323dd8e80f6.jpg?v=1762461386"},{"product_id":"546-15-3554-okotherm-cic-fire-resistant-cable-12-awg-4-conductors","title":"546-15-3554 Okotherm CIC Fire Resistant Type MC C-L-X - 12 AWG - 4 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551542214756,"sku":"NNC7847X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_b8da802e-c1bc-43bb-8224-c019000fb202.jpg?v=1762461386"},{"product_id":"546-15-3555-okotherm-cic-fire-resistant-cable-12-awg-5-conductors","title":"546-15-3555 Okotherm CIC Fire Resistant Type MC C-L-X - 12 AWG - 5 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551542345828,"sku":"NNC7848X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_8312be28-447c-4bb2-b2ca-e27a14e617dc.jpg?v=1762461387"},{"product_id":"546-15-3557-okotherm-cic-fire-resistant-cable-12-awg-7-conductors","title":"546-15-3557 Okotherm CIC Fire Resistant Type MC C-L-X - 12 AWG - 7 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551542476900,"sku":"NNC7849X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_747b8165-59b2-4d89-8e28-37611250d83c.jpg?v=1762461387"},{"product_id":"546-15-3559-okotherm-cic-fire-resistant-cable-12-awg-9-conductors","title":"546-15-3559 Okotherm CIC Fire Resistant Type MC C-L-X - 12 AWG - 9 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551542804580,"sku":"NNC7850X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_c67cbec0-b5bb-40b5-ad30-77fef63f16f0.jpg?v=1762461388"},{"product_id":"546-15-3562-okotherm-cic-fire-resistant-cable-12-awg-12-conductors","title":"546-15-3562 Okotherm CIC Fire Resistant Type MC C-L-X - 12 AWG - 12 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551542935652,"sku":"NNC7851X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_dfa5e1d1-df28-45de-bdeb-27bd363e83d4.jpg?v=1762461389"},{"product_id":"546-15-3569-okotherm-cic-fire-resistant-cable-12-awg-19-conductors","title":"546-15-3569 Okotherm CIC Fire Resistant Type MC C-L-X - 12 AWG - 19 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551543033956,"sku":"NNC7852X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_b0c8bc50-ba0f-4449-807f-30dcf5a94e2a.jpg?v=1762461494"},{"product_id":"546-15-3587-okotherm-cic-fire-resistant-cable-12-awg-37-conductors","title":"546-15-3587 Okotherm CIC Fire Resistant Type MC C-L-X - 12 AWG - 37 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551543459940,"sku":"NNC7853X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_a3a0d0ad-2d3c-4f25-8419-4e736f5d42d7.jpg?v=1762461494"},{"product_id":"546-15-3652-okotherm-cic-fire-resistant-cable-10-awg-2-conductors","title":"546-15-3652 Okotherm CIC Fire Resistant Type MC C-L-X - 10 AWG - 2 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551543853156,"sku":"NNC7854X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_2d6656c9-0563-4955-88b3-7ccb114e6d20.jpg?v=1762461495"},{"product_id":"546-15-3653-okotherm-cic-fire-resistant-cable-10-awg-3-conductors","title":"546-15-3653 Okotherm CIC Fire Resistant Type MC C-L-X - 10 AWG - 3 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551545163876,"sku":"NNC7855X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_84867238-ac13-4b0d-a4c4-b5c9eb02f11d.jpg?v=1762461495"},{"product_id":"546-15-3654-okotherm-cic-fire-resistant-cable-10-awg-4-conductors","title":"546-15-3654 Okotherm CIC Fire Resistant Type MC C-L-X - 10 AWG - 4 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551547129956,"sku":"NNC7856X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_01e23ee9-92fa-46ab-8bd1-02f9345ef661.jpg?v=1759805397"},{"product_id":"546-15-3655-okotherm-cic-fire-resistant-cable-10-awg-5-conductors","title":"546-15-3655 Okotherm CIC Fire Resistant Type MC C-L-X - 10 AWG - 5 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551547195492,"sku":"NNC7857X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_151163df-2756-4364-9838-ff3b3f60fb59.jpg?v=1762461496"},{"product_id":"546-15-3657-okotherm-cic-fire-resistant-cable-10-awg-7-conductors","title":"546-15-3657 Okotherm CIC Fire Resistant Type MC C-L-X - 10 AWG - 7 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551549161572,"sku":"NNC7858X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_5cc60d49-6ba9-4dae-82cd-e18db2aeea48.jpg?v=1762461498"},{"product_id":"546-15-3659-okotherm-cic-fire-resistant-cable-10-awg-9-conductors","title":"546-15-3659 Okotherm CIC Fire Resistant Type MC C-L-X - 10 AWG - 9 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551550701668,"sku":"NNC7859X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_474dcd5c-3bf6-4299-bedd-520a99ea9d9b.jpg?v=1762461498"},{"product_id":"546-15-3662-okotherm-cic-fire-resistant-cable-10-awg-12-conductors","title":"546-15-3662 Okotherm CIC Fire Resistant Type MC C-L-X - 10 AWG - 12 Conductors","description":"[short]\n\n[\/short]\n\u003cp\u003e\u003cstrong\u003eCable Description\u003c\/strong\u003e\u003cbr\u003e Nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, with FR tape if required, color or number coded fiber glass braid, cabled conductors, optional grounding conductor, cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConductors:\u003c\/strong\u003e Nickel Coated Copper\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkotherm Thermoset Silicone, with FR tape if required\u003cbr\u003e \u003cstrong\u003eColor Code:\u003c\/strong\u003e ICEA S-73-532, Method 3 or 4\u003cbr\u003e \u003cstrong\u003eBraid:\u003c\/strong\u003e Fiber Glass Braid\u003cbr\u003e \u003cstrong\u003eArmor-CLX:\u003c\/strong\u003e Continuously Welded and Corrugated Aluminum\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eBlack PVC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Industry Standards\u003c\/strong\u003e\u003cbr\u003e — UL 1569, 1309 — ICEA S-73-532\u003cbr\u003e (NEMA WC 57) — ICEA S-95-658\u003cbr\u003e (NEMA WC 70) — ASTM B-355\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlame Tests:\u003c\/strong\u003e\u003cbr\u003e IEC 60331, ICEA T-29-520, IEEE 1202\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okotherm CIC 600 volt control cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.\u003cbr\u003e Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I \u0026amp; II, Division 2, Class III,Division 1 and 2 and Class I, Zone 2 hazardous locations per NEC Articles 501, 502, 503, and 505.\u003cbr\u003e Okotherm CIC CLX Type MC control cables are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with NEC articles 330 and 725.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC cable E38916 and Marine Shipboard Cable E137931.\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial (2\/C 14 AWG and larger) and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202-1991 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system — color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eReduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.15(E)(3) or 505.16(C)(2)(c).\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping (ABS) listed as CWCMC Type MC.\u003c\/li\u003e\n\u003cli\u003eFire Resistant - qualified to 2000°F for 3 hours per IEC 60331.\u003c\/li\u003e\n\u003cli\u003eOptional LSZH jacket available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551550963812,"sku":"NNC7860X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okotherm-cic-fire-resistant-cable_6_aabfbbcc-fdb4-4a4b-b258-ed8e528c420b.jpg?v=1762461499"}],"url":"https:\/\/nassaunationalcable.com\/en-ca\/collections\/okotherm-cic-fire-resistant-type-mc-c-l-x.oembed?page=2","provider":"NassauNationalCable","version":"1.0","type":"link"}