{"title":"OKONITE FMR OKOLON TS-CPE","description":"","products":[{"product_id":"202-10-2033-okonite-fmr-okolon-ts-cpe-16-awg-3-conductors","title":"202-10-2033 Okonite FMR Okolon TS-CPE - 16 AWG - 3 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551586648164,"sku":"NNC8016X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_71bb14af-25ee-48ec-812f-c9945bcfdc30.jpg?v=1759805432"},{"product_id":"202-10-2034-okonite-fmr-okolon-ts-cpe-16-awg-4-conductors","title":"202-10-2034 Okonite FMR Okolon TS-CPE - 16 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551586812004,"sku":"NNC8017X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_99d04278-3860-4fcf-8d22-786b64ddb735.jpg?v=1762461605"},{"product_id":"202-10-2035-okonite-fmr-okolon-ts-cpe-16-awg-5-conductors","title":"202-10-2035 Okonite FMR Okolon TS-CPE - 16 AWG - 5 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551586844772,"sku":"NNC8018X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_6651f114-3980-4834-96a9-8c01bbb51313.jpg?v=1762461605"},{"product_id":"202-10-2037-okonite-fmr-okolon-ts-cpe-16-awg-7-conductors","title":"202-10-2037 Okonite FMR Okolon TS-CPE - 16 AWG -7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551586910308,"sku":"NNC8019X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_642f30a8-89ad-444d-a88e-4a55dbc6a6df.jpg?v=1759805432"},{"product_id":"202-10-2039-okonite-fmr-okolon-ts-cpe-16-awg-9-conductors","title":"202-10-2039 Okonite FMR Okolon TS-CPE - 16 AWG - 9 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551586943076,"sku":"NNC8020X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_d589e286-a33d-4f52-a821-e0ef52666041.jpg?v=1759805433"},{"product_id":"202-10-2042-okonite-fmr-okolon-ts-cpe-16-awg-12-conductors","title":"202-10-2042 Okonite FMR Okolon TS-CPE - 16 AWG - 12 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551587008612,"sku":"NNC8021X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_bccda14a-6e53-46d7-908c-18a233412e3e.jpg?v=1762461606"},{"product_id":"202-10-2049-okonite-fmr-okolon-ts-cpe-16-awg-19-conductors","title":"202-10-2049 Okonite FMR Okolon TS-CPE - 16 AWG - 19 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551587041380,"sku":"NNC8022X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_c84b2c50-d7cb-47c5-8c31-66d17a5a6872.jpg?v=1762461606"},{"product_id":"202-10-2067-okonite-fmr-okolon-ts-cpe-16-awg-37-conductors","title":"202-10-2067 Okonite FMR Okolon TS-CPE - 16 AWG - 37 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551587074148,"sku":"NNC8023X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_744aa069-37c2-49db-8ab7-2bccc180b14d.jpg?v=1762461607"},{"product_id":"202-10-2152-okonite-fmr-okolon-ts-cpe-14-awg-2-conductors","title":"202-10-2152 Okonite FMR Okolon TS-CPE - 14 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551587270756,"sku":"NNC8024X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_f891881c-56de-48da-b39a-1f41ce905cff.jpg?v=1759805433"},{"product_id":"202-10-2153-okonite-fmr-okolon-ts-cpe-14-awg-3-conductors","title":"202-10-2153 Okonite FMR Okolon TS-CPE - 14 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551587467364,"sku":"NNC8025X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_42d59ea0-50f9-47dc-93ee-9f33c0d289cf.jpg?v=1762461608"},{"product_id":"202-10-2154-okonite-fmr-okolon-ts-cpe-14-awg-4-conductors","title":"202-10-2154 Okonite FMR Okolon TS-CPE - 14 AWG - 4 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551587565668,"sku":"NNC8026X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_328d4922-387c-4149-ab64-cd77d7417277.jpg?v=1759805435"},{"product_id":"202-10-2155-okonite-fmr-okolon-ts-cpe-14-awg-5-conductors","title":"202-10-2155 Okonite FMR Okolon TS-CPE - 14 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551588417636,"sku":"NNC8027X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_9ba9d686-f433-4134-8e9e-dca27e112789.jpg?v=1762461610"},{"product_id":"202-10-2157-okonite-fmr-okolon-ts-cpe-14-awg-7-conductors","title":"202-10-2157 Okonite FMR Okolon TS-CPE - 14 AWG -7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551588483172,"sku":"NNC8028X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_9acdbcb5-a98d-4c06-9ce3-6a0bba23b7a3.jpg?v=1759805435"},{"product_id":"202-10-2159-okonite-fmr-okolon-ts-cpe-14-awg-9-conductors","title":"202-10-2159 Okonite FMR Okolon TS-CPE - 14 AWG - 9 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551588515940,"sku":"NNC8029X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_c017eb9b-d964-4b12-9107-e23c3bf46233.jpg?v=1762461611"},{"product_id":"202-10-2162-okonite-fmr-okolon-ts-cpe-14-awg-12-conductors","title":"202-10-2162 Okonite FMR Okolon TS-CPE - 14 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551588810852,"sku":"NNC8030X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_e9fc5adc-27b9-49fe-ae96-ab839eaa12d3.jpg?v=1759805436"},{"product_id":"202-10-2169-okonite-fmr-okolon-ts-cpe-14-awg-19-conductors","title":"202-10-2169 Okonite FMR Okolon TS-CPE - 14 AWG - 19 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551588876388,"sku":"NNC8031X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_a28ff346-96e6-4704-a3eb-0361ebee4ce3.jpg?v=1762461612"},{"product_id":"202-10-2187-okonite-fmr-okolon-ts-cpe-14-awg-37-conductors","title":"202-10-2187 Okonite FMR Okolon TS-CPE - 14 AWG - 37 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551588941924,"sku":"NNC8032X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_75720851-7ad2-4fd5-8561-2e335157f72b.jpg?v=1762461613"},{"product_id":"202-10-2302-okonite-fmr-okolon-ts-cpe-12-awg-2-conductors","title":"202-10-2302 Okonite FMR Okolon TS-CPE - 12 AWG - 2 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551589007460,"sku":"NNC8033X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_6a20103c-bdc5-425b-8472-93951de70b64.jpg?v=1759805436"},{"product_id":"202-10-2303-okonite-fmr-okolon-ts-cpe-12-awg-3-conductors","title":"202-10-2303 Okonite FMR Okolon TS-CPE - 12 AWG - 3 Conductors","description":"\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551589138532,"sku":"NNC8034X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_37547c92-4dbe-4811-be8c-2cb3d97b10ca.jpg?v=1762461614"},{"product_id":"202-10-2304-okonite-fmr-okolon-ts-cpe-12-awg-4-conductors","title":"202-10-2304 Okonite FMR Okolon TS-CPE - 12 AWG - 4 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551589236836,"sku":"NNC8035X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_cee06dcb-c900-4c2b-8f03-12c52f6c00d0.jpg?v=1762461615"},{"product_id":"202-10-2305-okonite-fmr-okolon-ts-cpe-12-awg-5-conductors","title":"202-10-2305 Okonite FMR Okolon TS-CPE - 12 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551589793892,"sku":"NNC8036X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_9af2dd69-8c82-4241-abef-2ba8b0f30d15.jpg?v=1759805436"},{"product_id":"202-10-2307-okonite-fmr-okolon-ts-cpe-12-awg-7-conductors","title":"202-10-2307 Okonite FMR Okolon TS-CPE - 12 AWG -7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551589859428,"sku":"NNC8037X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_73df8f5f-b9ed-4aa0-8d05-660c07891979.jpg?v=1759805438"},{"product_id":"202-10-2309-okonite-fmr-okolon-ts-cpe-12-awg-9-conductors","title":"202-10-2309 Okonite FMR Okolon TS-CPE - 12 AWG - 9 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551590023268,"sku":"NNC8038X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_f9847a58-d3d5-4e10-b466-beecc61ea89a.jpg?v=1762461617"},{"product_id":"202-10-2312-okonite-fmr-okolon-ts-cpe-12-awg-12-conductors","title":"202-10-2312 Okonite FMR Okolon TS-CPE - 12 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551590154340,"sku":"NNC8039X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_1d7277ed-03b3-4dfd-9d67-7266a9891169.jpg?v=1762461618"},{"product_id":"202-10-2319-okonite-fmr-okolon-ts-cpe-12-awg-19-conductors","title":"202-10-2319 Okonite FMR Okolon TS-CPE - 12 AWG - 19 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551590187108,"sku":"NNC8040X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_92b0000e-8673-4ae7-84b4-4877dc214ec1.jpg?v=1762461618"},{"product_id":"202-10-2337-okonite-fmr-okolon-ts-cpe-12-awg-37-conductors","title":"202-10-2337 Okonite FMR Okolon TS-CPE - 12 AWG - 37 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551590350948,"sku":"NNC8041X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_6fc8fc1f-8572-4e98-910c-e8745aed4e9c.jpg?v=1762461619"},{"product_id":"202-10-2452-okonite-fmr-okolon-ts-cpe-10-awg-2-conductors","title":"202-10-2452 Okonite FMR Okolon TS-CPE - 10 AWG - 2 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551590416484,"sku":"NNC8042X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_c7ab42b4-e021-47d5-97ff-d2b073ede2ad.jpg?v=1762461619"},{"product_id":"202-10-2453-okonite-fmr-okolon-ts-cpe-10-awg-3-conductors","title":"202-10-2453 Okonite FMR Okolon TS-CPE - 10 AWG - 3 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551590449252,"sku":"NNC8043X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_70b782c4-93ae-4f2a-bcec-1fb42dd26304.jpg?v=1762461621"},{"product_id":"202-10-2454-okonite-fmr-okolon-ts-cpe-10-awg-4-conductors","title":"202-10-2454 Okonite FMR Okolon TS-CPE - 10 AWG - 4 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551590711396,"sku":"NNC8044X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_51fa4109-a89e-460b-bb6b-a086679d9f33.jpg?v=1762461621"},{"product_id":"202-10-2455-okonite-fmr-okolon-ts-cpe-10-awg-5-conductors","title":"202-10-2455 Okonite FMR Okolon TS-CPE - 10 AWG - 5 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551590973540,"sku":"NNC8045X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_39b4acff-ae6e-4964-a99f-a0db3551acf6.jpg?v=1762461622"},{"product_id":"202-10-2457-okonite-fmr-okolon-ts-cpe-10-awg-7-conductors","title":"202-10-2457 Okonite FMR Okolon TS-CPE - 10 AWG -7 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551591006308,"sku":"NNC8046X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_774b66c3-fd2a-4ab5-b2d7-e97e14c54579.jpg?v=1762461622"},{"product_id":"202-10-2459-okonite-fmr-okolon-ts-cpe-10-awg-9-conductors","title":"202-10-2459 Okonite FMR Okolon TS-CPE - 10 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551591104612,"sku":"NNC8047X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_8e5064ff-c671-4784-aa96-972ade730af7.jpg?v=1762461623"},{"product_id":"202-10-2462-okonite-fmr-okolon-ts-cpe-10-awg-12-conductors","title":"202-10-2462 Okonite FMR Okolon TS-CPE - 10 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551591137380,"sku":"NNC8048X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_c7cef121-c8d2-41e6-a111-366d3e713da7.jpg?v=1762461623"},{"product_id":"202-10-2652-okonite-fmr-okolon-ts-cpe-9-awg-2-conductors","title":"202-10-2652 Okonite FMR Okolon TS-CPE - 9 AWG - 2 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOkonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551591235684,"sku":"NNC8049X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_dcb0532f-cd6c-4132-a825-1d837dfc75ca.jpg?v=1762461624"},{"product_id":"202-10-2653-okonite-fmr-okolon-ts-cpe-9-awg-3-conductors","title":"202-10-2653 Okonite FMR Okolon TS-CPE - 9 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551591563364,"sku":"NNC8050X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_4bbbc4e3-b2e0-489a-bff7-d83478c5295d.jpg?v=1759805438"},{"product_id":"202-10-2654-okonite-fmr-okolon-ts-cpe-9-awg-4-conductors","title":"202-10-2654 Okonite FMR Okolon TS-CPE - 9 AWG - 4 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551591596132,"sku":"NNC8051X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_f473dcce-75c4-4189-b507-b98ae736d1e8.jpg?v=1762461626"},{"product_id":"202-10-2655-okonite-fmr-okolon-ts-cpe-9-awg-5-conductors","title":"202-10-2655 Okonite FMR Okolon TS-CPE - 9 AWG - 5 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551591661668,"sku":"NNC8052X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_45374562-8c94-4ed2-b817-717b25a988f7.jpg?v=1762461626"},{"product_id":"202-10-2657-okonite-fmr-okolon-ts-cpe-9-awg-7-conductors","title":"202-10-2657 Okonite FMR Okolon TS-CPE - 9 AWG -7 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551591858276,"sku":"NNC8053X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_9ae91ecd-4b8d-4bf0-826a-ca8f3604962e.jpg?v=1762461627"},{"product_id":"202-10-2659-okonite-fmr-okolon-ts-cpe-9-awg-9-conductors","title":"202-10-2659 Okonite FMR Okolon TS-CPE - 9 AWG - 9 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551592054884,"sku":"NNC8054X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_30246285-8585-4003-a9f8-2939b697b672.jpg?v=1762461627"},{"product_id":"202-10-2662-okonite-fmr-okolon-ts-cpe-9-awg-12-conductors","title":"202-10-2662 Okonite FMR Okolon TS-CPE - 9 AWG - 12 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.\u003cbr\u003e The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003cbr\u003e Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors: \u003c\/strong\u003eBare copper per ASTM B-3, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet. \u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways,direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27551592087652,"sku":"NNC8055X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_ce7efbda-5961-42d1-9584-9e135295a26c.jpg?v=1762461629"}],"url":"https:\/\/nassaunationalcable.com\/en-ca\/collections\/okonite-fmr-okolon-ts-cpe.oembed?page=3","provider":"NassauNationalCable","version":"1.0","type":"link"}