Product Information

Specification

A1061804 18 AWG 4C LUTZE DRIVEFLEX® XLPE (C) PVC VFD Cable Shielded

Allowable Ampacity for A1061804 18 AWG 4C LUTZE DRIVEFLEX® XLPE (C) PVC VFD Cable Shielded: 100 Amps

Application:

• Dual-shielded motor supply cable to connect power to 3- phase motors, VFDs and servo drives
• Cable design for harsh industrial environments and operating conditions with high noise levels
• Thermoset XLPE insulation offering superior overload and short-circuit temperature
• Type XHHW-2 insulation offering smaller ODs for general VFD applications
• Compliant with NFPA 79 requirements
• TC-ER-JP for use with cable trays without conduit, which can reduce installation costs in industrial environments
• WTTC – wind turbine tray cable rating for use in wind power generation
• Dry, damp or wet conditions

Also Known As:

LUTZE DRIVEFLEX® XLPE (C) Cable, DRIVEFLEX® Cable, PVC Cable, Motor Cable, Lutze Cable, Silicone-free Cable, Flexible Cable, Tinned copper Cable, VFD Cable

Characteristics:

• Flexible XLPE conductor design
• Reduced cable ODs
• High insulation resistance
• Low capacitance cable
• Effective dual layer shield for EMC compliance
• Oil resistant jacket designed for easy stripping
• Non-wicking fillers
• Crush impact resistant
• Gas/vapor-tight sheath per UL 1277
• Sunlight resistant
• Flame retardant
• Direct burial
• Talc and silicone free

Standards:

Conformity:

• UL 1277
• RoHS
• REACH

Oil resistance:

• Oil Res II

Approvals:

UL Type Flexible Motor Supply, Flexible VFD Servo Cable, TC-ER-JP, WTTC, DP-1 Meets NEC 336, 392 Class I & II, Div. 2 and Class I Zone 2 per NEC 501, 502, 505 AWM 20886 Submersible Pump (≥ AWG14) c(UL) TC, CIC FT4

Construction:

• AWG conductor
• Flexible fine wire stranded tinned copper conductors for improved electrical characteristics and reduced oxidation
• Thermoset XLPE insulation type XHHW-2, Wet/Dry
• Shielded with foil tape, tinned copper braid with 80% optical coverage, and drain wire
• Oil resistant PVC jacket
• Black jacket similar to RAL 9005

Technical Data:

• Voltage: 600V 90C TC-ER-JP 1000V 90C Flexible VFD Servo Cable 1000V 90C WTTC 1000V 105C AWM
• Temperature range: -40°C - +105°C static
• Bending radius min: 6 x cable OD
• Conductor marking: Black with white numbers and one green/yellow ground

Specification:

• Number of conductors/cross-section: AWG18/04C (19/30)
• Jacket material: PVC
• Jacket color: Black RAL 9005
• Outer Ø: 0.415 Inches
• Weight: 113.4 Lbs
• Cu-Index: 42 Lbs

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color