Product Information

Specification

Igus MAT9385002 24 AWG 4C RJ45 Male 8-Pin Plug TPE Connector Beckhoff ZK1090-9191-xxxx EtherCAT Patch Network Cable

Allowable Ampacity for Igus MAT9385002 24 AWG 4C RJ45 Male 8-Pin Plug TPE Connector Beckhoff ZK1090-9191-xxxx EtherCAT Patch Network Cable: 100 Amps

Also Known as: 

RJ45 Connector, Igus EtherCAT Connector, IGUS, Igus Plug Connector, IGUS RJ45 Connector, Beckhoff 

Construction:

• Conductor: Fine-wire stranded conductor in especially bending-resistant version consisting of bare copper wires (according to DIN EN 60228)

• Conductor Insulation: Mechanically high-quality TPE mixture (According to bus specification)

• Conductor Construction: According to bus specification.

• Conductor Identification: According to bus specification.

• Overall shield: Extremely bending-resistant braiding made of tinned copper wires. Coverage approx. 70% linear, approx. 90% optical.

• Jacket Color: red lilac (similar to RAL 4001)

• Outer jacket: Low-adhesion mixture on the basis of TPE, especially abrasionresistant and highly flexible, adapted to suit the requirements in e-chains®.

Properties and Approvals:

• UV resistance: Medium
• Oil Resistance: Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA
• Flame retardant: According to IEC 60332-1-2, CEI 20-35, VW-1, FT-1
• Silicone-free: Free from silicon which can affect paint adhesion (according to PV 3.10.7 – status 1992).
• UL/CSA AWM: See data sheet for details
• NFPA 79: Following NFPA 79-2012 chapter 12.9
• DNV: Certified according to DNV Type Testing – Certificate No.: 61 935-14 HH
• EAC: Certified to no. TC RU C-DE. ME77.B.01218
• CTP: Certified to no. C-DE.PB49.B.00416
• Lead free: Following 2011/65/EU (RoHS-II)
• CEI: Following CEI 20-35
• Clean room: According to ISO Class 1. Outer jacket material complies with CF34.UL.25.04.D, tested by IPA according to standard 14644-1
• DESINA: According to VDW, DESINA standardization
• CE Guideline: Following 2014/35/EU

Specification:

AWG size: 24
Number of Conductor: 4
Conductor: Bare Copper
Insulation: TPE
Jacket: TPE
Outer Diameter: 8.5 inch
 Minimum bend radius: 10 lbs/mft
Voltage: 300/300 V
Weight: 47.52 lbs/mft 
Part Number: MAT9385002

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color