Product Information

Specification

Igus MAT9090019 8/4C 16/2P 7-Pin Connector PUR Bosch Rexroth IKL0121 Pre-Assembled Servo Motor Cable

Allowable Ampacity for Igus MAT9090019 8/4C 16/2P 7-Pin Connector PUR Bosch Rexroth IKL0121 Pre-Assembled Servo Motor Cable: 100 Amps

Also Known as: 

Motor Connector, Servo Motor Connector, IGUS, Igus 7-Pin Connector, IGUS Motor Connector, Bosch Rexroth

Construction:

• Conductor: Fine-wire stranded conductor in especially bending-resistant version consisting of bare copper wires (according to DIN EN 60228)

• Conductor Insulation: Mechanically high-quality, especially low-capacitance TPE mixture

• Conductor Construction: Power cores with control pair elements stranded with elements for high tensile stresses

• Conductor Identification: Energy conductor: Cores black with white numerals, one core green-yellow.
1.Core: U / L1 / C / L+
2.Core: V / L2
3.Core: W / L3 / L-
2 Signal pairs: Cores black with white numerals.
1. Signal pair: 5
2. Signal pair: 6
3. Signal pair: 7
4. Signal pair: 8

• Overall shield: Extremely bending-resistant braiding made of tinned copper wires. Coverage approx. 70% linear, approx. 90% optical.

• Jacket Color: Pastel orange (similar to RAL 2003)

• Outer jacket: Low adhesion mixture on the basis of PUR, adapted to suit the requirements in e-chains® (According to DIN EN 50363-10-2)

Properties and Approvals:

• UV resistance: Medium
• Oil Resistance: Oil-resistant according to DIN EN 50363-10-2
• Offshore: MUD-resistant following NEK 606 - status 2009
• Flame retardant: According to IEC 60332-1-2, CEI 20-35, VW-1, FT-1
• Silicone-free: Free from silicon which can affect paint adhesion (according to PV 3.10.7 – status 1992).
• Halogen-free: Following EN 60754
• UL/CSA AWM: See data sheet for details
• NFPA 79: Following NFPA 79-2012 chapter 12.9
• DNV: Certified according to DNV Type Testing – Certificate No.: 61 935-14 HH
• EAC: Certified according to No. TC RU C-DE.ME77.B.01255
• CTP: Certified to no. C-DE.PB49.B.00420
• Lead free: Following 2011/65/EU (RoHS-II)
• CEI: Following CEI 20-35
• Clean room: According to ISO Class 1. Outer jacket material complies with CF27.07.05.02.01.D, tested by IPA according to standard 14644-1
• DESINA: According to VDW, DESINA standardization
• CE Guideline: Following 2014/35/EU

Specification:

AWG size: 8
Number of Conductor: 4
AWG size: 16
Number of Pair: 2
Conductor: Bare Copper
Insulation: TPE
Jacket: PUR
Outer Diameter: 0.89 inch
Copper Index: 397.8 lbs/mft
Voltage: 1000 V
Weight: 565.8 lbs/mft 
Part Number: MAT9090019

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color