Product Information

Specification

Also known as:

Pad-mounted transformer, load break switch, medium voltage transformers, power system reliability.

About:

Pad-mounted transformers are equipment used in underground distribution systems that are installed on a base or concrete slab called a "pedestal.” They are used for residential applications, shopping centers, buildings, and hotels, among others, and in general in those cases in which safety, space, or aesthetic power supply is required with shielded medium-voltage underground dry cable.

Notes: This product can be customized as per customer requests

Features:

• Removable and interchangeable Bay-0-Net type fuses, which protect the equipment against external events such as extreme overloads and external short circuits in the secondary network.
• Built-in limiting fuses that protect the primary network from high-current faults in the windings.
• DPS, or elbow-type surge arresters, which protect the equipment against overvoltages produced in the network.
• A breaker with an opening capacity under load, which allows for switching operations.

Specification:                        

Type: Radial or Loop Feed

Capacity: From 5 kVA up to 500 kvA

Phases: One

Tension: Up to 34 kv

Bil: Up to 200 kV

Winding Material: Aluminum or copper

Cooling Class: ONAN

Frequency: 60 0 50 Hz

Tapchanger: + 2, 2.5% or according to customer requirements.

Temperature Raise: Typically 65/65°C, or according to customer requirements.

K Factor: K1, K2, K4, K6, K9, K13, K20 or according to customer requirements.

Type Of Efficiency: Class A, B, C o D; DOE

Type Of Insulation: Mineral or Biodegrable

Tank: 

Manufactured with cold rolled and hot rolled sheet steel with a desing that allows it to withstand internal pressure and mechanical syress. Or with stainless steel.

Paint System: 

Special electrostatic paint of great resistance and durability, especially for outdoors and corrosive enviroments.

Gaskets: 

Highly durable and compatible with dielectric oil, to guarantee the life of the equipment.

Accessories: 

• Dead front type high tension bushings (wells, inserts, elbows).
• Low tension bushings
• Support for parking hubs in AT
• Overpressure valve
• Oil level gage
• Drain valve with sampling mechanism
• Ground connector
• Lifting and fixing devices
• Nameplate made of high-strength anodized aluminum
• Tap switch
• High and low voltage cabinets with doors and locks

Standard:

IEEE C57.12.34, IEEE C57.12.28, IEEE C57.12.29, IEEE C57.12.38, NTC 3997, NIC 5074 and RETIE