{"title":"OKONITE-FMR OKOLON TS-CPE - 2000V","description":"","products":[{"product_id":"202-14-2152-okonite-fmr-okolon-ts-cpe-2000v-14-awg-2-conductors","title":"202-14-2152 Okonite-FMR Okolon TS-CPE - 2000V - 14 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552870465636,"sku":"NNC8200X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_83fdea1d-b640-4801-8bc8-db11d7fb4964.jpg?v=1762461724"},{"product_id":"202-14-2153-okonite-fmr-okolon-ts-cpe-2000v-14-awg-3-conductors","title":"202-14-2153 Okonite-FMR Okolon TS-CPE - 2000V - 14 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552870498404,"sku":"NNC8201X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_ccb54e3c-692a-450f-bff5-7f2f96c00e33.jpg?v=1762461724"},{"product_id":"202-14-2154-okonite-fmr-okolon-ts-cpe-2000v-14-awg-4-conductors","title":"202-14-2154 Okonite-FMR Okolon TS-CPE - 2000V - 14 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552870531172,"sku":"NNC8202X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_2f14e1a5-c910-4830-9141-5a7d8cd4c5ab.jpg?v=1759805468"},{"product_id":"202-14-2155-okonite-fmr-okolon-ts-cpe-2000v-14-awg-5-conductors","title":"202-14-2155 Okonite-FMR Okolon TS-CPE - 2000V - 14 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552870596708,"sku":"NNC8203X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_d6fbb1a8-1bdb-4611-8194-67b91f0a08d8.jpg?v=1759805468"},{"product_id":"202-14-2157-okonite-fmr-okolon-ts-cpe-2000v-14-awg-7-conductors","title":"202-14-2157 Okonite-FMR Okolon TS-CPE - 2000V - 14 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552870695012,"sku":"NNC8204X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_638693e1-2d09-4af5-9077-dc922d994fe3.jpg?v=1762461726"},{"product_id":"202-14-2159-okonite-fmr-okolon-ts-cpe-2000v-14-awg-9-conductors","title":"202-14-2159 Okonite-FMR Okolon TS-CPE - 2000V - 14 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552870727780,"sku":"NNC8205X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_80a5d986-f333-4207-a719-245e2874fc51.jpg?v=1759805469"},{"product_id":"202-14-2162-okonite-fmr-okolon-ts-cpe-2000v-14-awg-12-conductors","title":"202-14-2162 Okonite-FMR Okolon TS-CPE - 2000V - 14 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552870793316,"sku":"NNC8206X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_6a35f513-bb8b-4533-8969-e6e1872b88fc.jpg?v=1762461728"},{"product_id":"202-14-2169-okonite-fmr-okolon-ts-cpe-2000v-14-awg-19-conductors","title":"202-14-2169 Okonite-FMR Okolon TS-CPE - 2000V - 14 AWG - 19 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552870858852,"sku":"NNC8207X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_dd5cc633-2ff3-447d-9c03-452bbbc91c61.jpg?v=1759805469"},{"product_id":"202-14-2187-okonite-fmr-okolon-ts-cpe-2000v-14-awg-37-conductors","title":"202-14-2187 Okonite-FMR Okolon TS-CPE - 2000V - 14 AWG - 37 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552871055460,"sku":"NNC8208X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_a5ce2588-b717-4461-b562-a1606066ae39.jpg?v=1762461729"},{"product_id":"202-14-2302-okonite-fmr-okolon-ts-cpe-2000v-12-awg-2-conductors","title":"202-14-2302 Okonite-FMR Okolon TS-CPE - 2000V - 12 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552872562788,"sku":"NNC8209X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_47bba2ab-59e2-449f-86bf-5a3c98961d26.jpg?v=1762461729"},{"product_id":"202-14-2303-okonite-fmr-okolon-ts-cpe-2000v-12-awg-3-conductors","title":"202-14-2303 Okonite-FMR Okolon TS-CPE - 2000V - 12 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552873939044,"sku":"NNC8210X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_4b08fee8-5350-485d-b38a-7668fa77d2c5.jpg?v=1762461731"},{"product_id":"202-14-2304-okonite-fmr-okolon-ts-cpe-2000v-12-awg-4-conductors","title":"202-14-2304 Okonite-FMR Okolon TS-CPE - 2000V - 12 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552874594404,"sku":"NNC8211X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_c2ca824d-4f1c-4993-b2cc-0664f998b586.jpg?v=1762461731"},{"product_id":"202-14-2305-okonite-fmr-okolon-ts-cpe-2000v-12-awg-5-conductors","title":"202-14-2305 Okonite-FMR Okolon TS-CPE - 2000V - 12 AWG - 5 Conductors","description":"\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552874659940,"sku":"NNC8212X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_38e68880-34f7-404a-a430-cd5f87d6f2b6.jpg?v=1762461732"},{"product_id":"202-14-2307-okonite-fmr-okolon-ts-cpe-2000v-12-awg-7-conductors","title":"202-14-2307 Okonite-FMR Okolon TS-CPE - 2000V - 12 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552874692708,"sku":"NNC8213X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_f99fd739-5da8-42e2-80a1-106d53dc0f29.jpg?v=1762461732"},{"product_id":"202-14-2309-okonite-fmr-okolon-ts-cpe-2000v-12-awg-9-conductors","title":"202-14-2309 Okonite-FMR Okolon TS-CPE - 2000V - 12 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552874758244,"sku":"NNC8214X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_387b0814-bf00-43fb-92b6-b6662f8e3dc6.jpg?v=1762461733"},{"product_id":"202-14-2312-okonite-fmr-okolon-ts-cpe-2000v-12-awg-12-conductors","title":"202-14-2312 Okonite-FMR Okolon TS-CPE - 2000V - 12 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552874823780,"sku":"NNC8215X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_907f596f-34f5-44e4-9996-bd866b889e7f.jpg?v=1759805471"},{"product_id":"202-14-2319-okonite-fmr-okolon-ts-cpe-2000v-12-awg-19-conductors","title":"202-14-2319 Okonite-FMR Okolon TS-CPE - 2000V - 12 AWG - 19 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552874856548,"sku":"NNC8216X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_87e1d5ac-80ae-473d-b3f8-968bad32cf87.jpg?v=1759805471"},{"product_id":"202-14-2337-okonite-fmr-okolon-ts-cpe-2000v-12-awg-37-conductors","title":"202-14-2337 Okonite-FMR Okolon TS-CPE - 2000V - 12 AWG - 37 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552874954852,"sku":"NNC8217X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_e51b1c26-bc9b-469f-bdfc-cea1b96440c3.jpg?v=1762461735"},{"product_id":"202-14-2452-okonite-fmr-okolon-ts-cpe-2000v-10-awg-2-conductors","title":"202-14-2452 Okonite-FMR Okolon TS-CPE - 2000V - 10 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552874987620,"sku":"NNC8218X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_007e8d43-2b25-4d38-9f96-b2d78085430e.jpg?v=1762461736"},{"product_id":"202-14-2453-okonite-fmr-okolon-ts-cpe-2000v-10-awg-3-conductors","title":"202-14-2453 Okonite-FMR Okolon TS-CPE - 2000V - 10 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552875053156,"sku":"NNC8219X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_387f0c9a-6d80-44d5-9524-e13a3e8185a0.jpg?v=1762461736"},{"product_id":"202-14-2454-okonite-fmr-okolon-ts-cpe-2000v-10-awg-4-conductors","title":"202-14-2454 Okonite-FMR Okolon TS-CPE - 2000V - 10 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552875118692,"sku":"NNC8220X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_36779109-5196-4d31-9457-d5a1954ff38e.jpg?v=1762461737"},{"product_id":"202-14-2455-okonite-fmr-okolon-ts-cpe-2000v-10-awg-5-conductors","title":"202-14-2455 Okonite-FMR Okolon TS-CPE - 2000V - 10 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552875249764,"sku":"NNC8221X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_3361fee4-4c44-47c1-92ea-6c2251c787ae.jpg?v=1762461737"},{"product_id":"202-14-2457-okonite-fmr-okolon-ts-cpe-2000v-10-awg-7-conductors","title":"202-14-2457 Okonite-FMR Okolon TS-CPE - 2000V - 10 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552875315300,"sku":"NNC8222X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_cd1e79cf-aad0-49fb-a587-d8215da268d9.jpg?v=1762461739"},{"product_id":"202-14-2459-okonite-fmr-okolon-ts-cpe-2000v-10-awg-9-conductors","title":"202-14-2459 Okonite-FMR Okolon TS-CPE - 2000V - 10 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552875348068,"sku":"NNC8223X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_69e75249-8e14-45b0-998e-3e9dbda047b2.jpg?v=1759805472"},{"product_id":"202-14-2462-okonite-fmr-okolon-ts-cpe-2000v-10-awg-12-conductors","title":"202-14-2462 Okonite-FMR Okolon TS-CPE - 2000V - 10 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552875413604,"sku":"NNC8224X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_fa46881f-df1a-4037-80ee-7dc78ac171b8.jpg?v=1762461740"},{"product_id":"202-14-2652-okonite-fmr-okolon-ts-cpe-2000v-9-awg-2-conductors","title":"202-14-2652 Okonite-FMR Okolon TS-CPE - 2000V - 9 AWG - 2 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552875479140,"sku":"NNC8225X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_fb1f9969-237b-4f6a-8689-b2aefc6ec6f8.jpg?v=1759805472"},{"product_id":"202-14-2653-okonite-fmr-okolon-ts-cpe-2000v-9-awg-3-conductors","title":"202-14-2653 Okonite-FMR Okolon TS-CPE - 2000V - 9 AWG - 3 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552876757092,"sku":"NNC8226X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_cac8846e-220a-461a-8b65-5822e51d6690.jpg?v=1759805474"},{"product_id":"202-14-2654-okonite-fmr-okolon-ts-cpe-2000v-9-awg-4-conductors","title":"202-14-2654 Okonite-FMR Okolon TS-CPE - 2000V - 9 AWG - 4 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552878231652,"sku":"NNC8227X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_0d87a72b-5e61-4644-abac-2de87dba4b6b.jpg?v=1762461741"},{"product_id":"202-14-2655-okonite-fmr-okolon-ts-cpe-2000v-9-awg-5-conductors","title":"202-14-2655 Okonite-FMR Okolon TS-CPE - 2000V - 9 AWG - 5 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552878985316,"sku":"NNC8228X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_c805c705-17ea-4e86-a723-7c1fd3c5186a.jpg?v=1759805474"},{"product_id":"202-14-2657-okonite-fmr-okolon-ts-cpe-2000v-9-awg-7-conductors","title":"202-14-2657 Okonite-FMR Okolon TS-CPE - 2000V - 9 AWG - 7 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552879018084,"sku":"NNC8229X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_29faf09b-d50e-4420-a5e3-6f0886d2674b.jpg?v=1759805475"},{"product_id":"202-14-2659-okonite-fmr-okolon-ts-cpe-2000v-9-awg-9-conductors","title":"202-14-2659 Okonite-FMR Okolon TS-CPE - 2000V - 9 AWG - 9 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552879149156,"sku":"NNC8230X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_66838ac1-32da-44f7-87cd-7a9727081219.jpg?v=1759805475"},{"product_id":"202-14-2662-okonite-fmr-okolon-ts-cpe-2000v-9-awg-12-conductors","title":"202-14-2662 Okonite-FMR Okolon TS-CPE - 2000V - 9 AWG - 12 Conductors","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU\/hour and 210,000 BTU\/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.\u003cbr\u003e The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Jacket\u003c\/strong\u003e\u003cbr\u003e The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Coated copper per ASTM B-33, Class B stranded per ASTM B-8.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eOkonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.\u003cbr\u003e \u003cstrong\u003eColor Coding: \u003c\/strong\u003eBase colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.\u003cbr\u003e \u003cstrong\u003eAssembly:\u003c\/strong\u003e Conductors cabled using flame and moisture resistant fillers.\u003cbr\u003e \u003cstrong\u003eOverall Jacket: \u003c\/strong\u003eThe Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU\/hr) flame test.\u003c\/li\u003e\n\u003cli\u003eQuality Assurance traceability available on special order.\u003c\/li\u003e\n\u003cli\u003e90°C rated control cable, factory assembled for indoor or outdoor installation in cable trays, in raceways, direct burial in the earth, or supported by messenger wire.\u003c\/li\u003e\n\u003cli\u003eMechanically rugged.\u003c\/li\u003e\n\u003cli\u003eFlexible, easy to install and terminate.\u003c\/li\u003e\n\u003cli\u003eColor coded conductors.\u003c\/li\u003e\n\u003cli\u003eResistant to water, oil and most chemicals.\u003c\/li\u003e\n\u003cli\u003eThermally stable at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh insulation resistance, even at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall diameter, lightweight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27552879181924,"sku":"NNC8231X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/okonite-fmrn-okolon_123_13dfb6ca-50ce-4cdb-979d-f70912b9e934.jpg?v=1759805477"}],"url":"https:\/\/nassaunationalcable.com\/collections\/okonite-fmr-okolon-ts-cpe-2000v.oembed?page=2","provider":"NassauNationalCable","version":"1.0","type":"link"}