{"title":"HVTECK Copper 1\/C 220 mil TRXLPE TS AIA 15kV 133% IL Red PVC Jacket CSA","description":"","products":[{"product_id":"2-awg-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"2 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\" width=\"\" height=\"\" type=\"application\/pdf\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e2 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e2 AWG HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 2 AWG Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 2 AWG HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 2 AWG\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e  7\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  0.282\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e  0.760\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch): \u003c\/strong\u003e0.820\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  1.332\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 50\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch : \u003c\/strong\u003e1.432\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e 909\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e  17.2\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e  0.162\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e   0.204\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.059\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e 215\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e221\u003c\/span\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763809075569,"sku":"NNC130011","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"1-awg-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"1 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\" width=\"\" height=\"\" type=\"application\/pdf\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e1 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e1 AWG HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 1 AWG Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 1 AWG HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 1 AWG\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 19\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  0.322\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e  0.800\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch): \u003c\/strong\u003e0.860\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  1.372\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 50\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch : \u003c\/strong\u003e1.472\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft: \u003c\/strong\u003e275\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  999\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e  17.7\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e  0.128\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e  0.162\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.057 \u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e 245\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e247\u003c\/span\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763809501553,"sku":"NNC130012","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"1-0-awg-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"1\/0 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed type=\"application\/pdf\" height=\"\" width=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e1\/0 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e1\/0 AWG HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 1\/0 AWG Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 1\/0 AWG HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 1\/0 AWG\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 19\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  0.361\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e  0.839 \u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch): \u003c\/strong\u003e0.899\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  1.411\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 50\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch :  \u003c\/strong\u003e1.511\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft: \u003c\/strong\u003e343\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e 1099\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e  18.1\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e  0.102\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e   0.128\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.055\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e 278\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e275\u003c\/span\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763823133041,"sku":"NNC130013","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"2-0-awg-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"2\/0 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed type=\"application\/pdf\" height=\"\" width=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e2\/0 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e2\/0 AWG HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 2\/0 AWG Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 2\/0 AWG HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 2\/0 AWG\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 19\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  0.405\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e  0.884\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e0.944\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  1.468\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 50\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch :  \u003c\/strong\u003e1.568\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft: \u003c\/strong\u003e488\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e 1322\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e  18.8\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e   0.081\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e    0.102\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.053\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e  317\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e306\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 340px; height: 79.1904px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.5966px;\"\u003e\n\u003ctd colspan=\"2\" style=\"width: 325.114px; height: 35.5966px;\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible with Manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 160.597px;\"\u003e\u003cstrong\u003eSouthwire\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 164.517px;\"\u003e\u003cspan data-sheets-root=\"1\"\u003e670965\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763839091057,"sku":"NNC670965","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"3-0-awg-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"3\/0 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\" width=\"\" height=\"\" type=\"application\/pdf\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e3\/0 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e3\/0 AWG HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 3\/0 AWG Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 3\/0 AWG HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 3\/0 AWG\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 19\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e   0.456\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e   0.934\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e0.944\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  1.506\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 60\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch :  \u003c\/strong\u003e1.626\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e538\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  1409\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e   19.5\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e   0.064\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e    0.081\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.051\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e   357\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e335\u003c\/span\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763844333937,"sku":"NNC130014","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"4-0-awg-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"4\/0 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\" width=\"\" height=\"\" type=\"application\/pdf\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e4\/0 AWG HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e4\/0 AWG HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 4\/0 AWG Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 4\/0 AWG HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 4\/0 AWG\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 19\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e   0.512\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e   0.990\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):   \u003c\/strong\u003e1.050\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  1.574\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 60\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch : \u003c\/strong\u003e1.694\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e738\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e 1687\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e  20.3\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e 0.051\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e 0.065 \u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.049\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e 404\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e369\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 340px; height: 79.1904px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.5966px;\"\u003e\n\u003ctd colspan=\"2\" style=\"width: 325.114px; height: 35.5966px;\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible with Manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 160.597px;\"\u003e\u003cstrong\u003eSouthwire\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 164.517px;\"\u003e\u003cspan data-sheets-root=\"1\"\u003e672441^\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763847774577,"sku":"NNC672441","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"250-mcm-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"250 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\" width=\"\" height=\"\" type=\"application\/pdf\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e250 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e250 MCM HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 250 MCM Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 250 MCM HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 250 MCM\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 37\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  0.558\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e   1.044\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e1.104\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e 1.616\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 60\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch : \u003c\/strong\u003e1.736\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e793\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  1764\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e   20.8\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e  0.043\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e 0.056\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.048\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e 456\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e412\u003c\/span\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763856851313,"sku":"NNC130015","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"350-mcm-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"350 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed type=\"application\/pdf\" height=\"\" width=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e350 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e350 MCM HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 350 MCM Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 350 MCM HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 350 MCM\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 37\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  0.661\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e   1.147 \u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):   \u003c\/strong\u003e1.207\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e 1.731\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 60\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch : \u003c\/strong\u003e1.851\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e1177\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  2267\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e    22.2\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e  0.031\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e 0.041\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.045\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e 537\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e456\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 340px; height: 64.2898px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 41.2926px;\"\u003e\n\u003ctd colspan=\"2\" style=\"width: 325.114px; height: 41.2926px;\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible with Manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 22.9972px;\"\u003e\n\u003ctd style=\"width: 160.597px; height: 22.9972px;\"\u003e\u003cstrong\u003eSouthwire\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 164.517px; height: 22.9972px;\"\u003e\u003cspan data-sheets-root=\"1\"\u003e671319\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763863273841,"sku":"NNC671319","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"500-mcm-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"500 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed type=\"application\/pdf\" height=\"\" width=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e500 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e500 MCM HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 500 MCM Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 500 MCM HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 500 MCM\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 37\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  0.789\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e  1.275 \u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e1.335\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e 1.859\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 60\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch :  \u003c\/strong\u003e1.979\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e1649\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  2849\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e 23.7\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e   0.022\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e  0.030 \u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e  0.043\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e 616\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e497\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 340px; height: 64.2898px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 41.2926px;\"\u003e\n\u003ctd colspan=\"2\" style=\"width: 325.114px; height: 41.2926px;\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible with Manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 22.9972px;\"\u003e\n\u003ctd style=\"width: 160.597px; height: 22.9972px;\"\u003e\u003cstrong\u003eSouthwire\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 164.517px; height: 22.9972px;\"\u003e\u003cspan data-sheets-root=\"1\"\u003e672047\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763864322417,"sku":"NNC672047","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"750-mcm-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"750 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed type=\"application\/pdf\" height=\"\" width=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e750 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e750 MCM HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 750 MCM Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 750 MCM HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 750 MCM\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 61\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  0.968\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e   1.464\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e1.524\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e  110\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  2.108 \u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 60\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch :  \u003c\/strong\u003e2.228\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e2435\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  3920\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e 26.7\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e   0.014\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e  0.023\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e  0.041\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e  706\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:   \u003c\/strong\u003e551\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 340px; height: 64.2898px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 41.2926px;\"\u003e\n\u003ctd colspan=\"2\" style=\"width: 325.114px; height: 41.2926px;\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible with Manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 22.9972px;\"\u003e\n\u003ctd style=\"width: 160.597px; height: 22.9972px;\"\u003e\u003cstrong\u003eSouthwire\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 164.517px; height: 22.9972px;\"\u003e\u003cspan data-sheets-root=\"1\"\u003e641194\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763865043313,"sku":"NNC641194","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"1000-mcm-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"1000 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed type=\"application\/pdf\" height=\"\" width=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e1000 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e1000 MCM HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 1000 MCM Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 1000 MCM HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 1000 MCM\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 61\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  1.117\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e   1.613\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e1.673\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e  110\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  2.257\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 75\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch :  \u003c\/strong\u003e2.407\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft: \u003c\/strong\u003e3218\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  4910\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e 28.9\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e  0.011\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e  0.019\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e  0.039\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e 813\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp: \u003c\/strong\u003e596\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 340px; height: 64.2614px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 41.2642px;\"\u003e\n\u003ctd colspan=\"2\" style=\"width: 325.114px; height: 41.2642px;\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible with Manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 22.9972px;\"\u003e\n\u003ctd style=\"width: 160.597px; height: 22.9972px;\"\u003e\u003cstrong\u003eSouthwire\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 164.517px; height: 22.9972px;\"\u003e\u003cspan data-sheets-root=\"1\"\u003e672046\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763880575345,"sku":"NNC672046","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"1250-mcm-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"1250 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed type=\"application\/pdf\" height=\"\" width=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e1250 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e1250 MCM HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 1250 MCM Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 1250 MCM HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 1250 MCM\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e  91\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  1.250\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e   1.750\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e1.810\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e  110\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  2.406\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 75\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch : \u003c\/strong\u003e 2.556\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e3895\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  5886\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e  30.7\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e  0.009\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e  0.018 \u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.038\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763888374129,"sku":"NNC130016","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"1500-mcm-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"1500 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\" width=\"\" height=\"\" type=\"application\/pdf\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e1500 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e1500 MCM HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 1500 MCM Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 1500 MCM HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 1500 MCM\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e  91\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  1.370\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e  1.870\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e1.930\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e  110\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  2.526\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 75\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch : \u003c\/strong\u003e  2.676\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e4670\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e   6788\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e  32.1\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e   0.007\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e  0.017\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.037\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763899679089,"sku":"NNC130017","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"},{"product_id":"2000-mcm-hvteck-copper-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa","title":"2000 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed type=\"application\/pdf\" height=\"\" width=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26312_1.pdf?v=1756445052\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e2000 MCM HVTECK Copper 220 mil TRXLPE TS AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e2000 MCM HVTECK 15kV cable, TRXLPE 220 mil 15kV wire, 133% insulation level cable, Copper 1 conductor HV cable, CSA approved 15kV cable, 2000 MCM Red PVC jacket HVTECK wire, 15kV AIA cable CSA, 15kV shielded TRXLPE cable, 2000 MCM HVTECK 1\/C armored cable, 15kV copper underground cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e• Insulation Shield: \u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Copper Tape Shield: \u003c\/strong\u003eHelically wrapped 5 mil copper tape with 25% overlap\u003cstrong\u003e\u003cbr\u003e• Inner Jacket:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 2000 MCM\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e 127\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  1.583\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e  2.083\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e2.143\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e  110\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e   2.739\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 75\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch : \u003c\/strong\u003e 2.889\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e6218\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  8563\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e   34.7\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e   0.005\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e  0.017\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e 0.036\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55763905544561,"sku":"NNC130018","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/24_f3f35d98-de14-46d7-95ea-9e910ba4f5ea.png?v=1756445667"}],"url":"https:\/\/nassaunationalcable.com\/collections\/hvteck-copper-1-c-220-mil-trxlpe-ts-aia-15kv-133-il-red-pvc-jacket-csa.oembed","provider":"NassauNationalCable","version":"1.0","type":"link"}